Your Bag is emty
- Accueil /
- McIntosh MAC7200
Détails
Electronic Specifications :
Power Output per Channel : 200 Watts
Speaker Impedance : 2, 4, or 8 Ohms
Rated Power Band : 20Hz to 20kHz
Total Harmonic Distortion : 0.005%
Dynamic Headroom : 2dB
Frequency Response +0,-0.5dB : 20Hz to 20kHz
Frequency Response, +0, -3dB : 10Hz to 100kHz
Sensitivity Phono (Moving Coil) : 0.25mV
Sensitivity Phono (Moving Magnet) : 2.5mV
Sensitivity High Level (Balanced / Unbalanced) : 0.5V/0.25V
Sensitivity (Power Amp) : 1.4V
Signal To Noise Ratio (Moving Coil) : 80dB
Signal To Noise Ratio (Moving Magnet) : 82dB
Signal To Noise Ratio (High Level) : 95dB
Signal To Noise Ratio (Power Amp) : 113dB
Input Impedance (Balanced / Unbalanced) : 20K/20K
Damping Factor : >40
Maximum Output (Balanced / Unbalanced) : 8V Unbalanced
Connectivity
Headphone Output : Yes, High Drive HDX
High Level Inputs Unbalanced : 5 Stereo
High Level Inputs Balanced : 1 Stereo
Variable Outputs Unbalanced : 2
Variable Outputs Balanced : 0
Upgradable digital audio module : Yes
Digital USB Input : 1
Digital Coaxial Input : 2
Digital Optical Input : 2
Digital MCT (DIN) Input : 1
Phono Moving Magnet : Yes
Phono Moving Coil : Yes, ajustable
AM/FM Tuner option : Yes
Home Theater Pass Through : Yes
Digital Audio Specifications
Digital-to-Analog Converter (DAC) Type : 8-channel, 32-bit/192kHz PCM/DSD, Quad Balanced
Digital Coaxial Input Sample Rate :24-bit/44.1kHz to 192kHz
Digital Optical Input Sample Rate :24-bit/44.1kHz to 192kHz
Digital MCT (DIN) Input Sample Rate : 16-bit/44.1kHz (CD), DSD64 (SACD)
Digital USB Input Sample Rate : 32-bit/44.1kHz to 384kHz (PCM), DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz
FM general specifications
FM Tuning Range : 87.5MHz - 108.0MHz (Europe)
FM Channel Spacing : 50kHz (Europe50), 100kHz (Europe100, Japan)
FM Antenna Input : 75 ohms, Type “F” Coax connector
FM analog specifications
Useable Sensitivity : 2.2uV (18.1dBf)
50dB Quieting Sensitivity : 1.5uV (14.8dBf)
Signal To Noise Ratio : Mono: 70dB, Stereo: 68dB
Frequency Response : ±1dB 20Hz to 15,000Hz
Total Harmonic Distortion : Mono: 0.4%, Stereo: 0.8%
Channel Selectivity : 60dB Adjacent Channel, 66dB Alternate Channel
Stereo Separation : 38dB
Control
Tone Controls : Bass and Treeble
Tone Bypass and Input Assign : Yes
RS232 Control Input : Yes
Power Control Output : Yes
General Specifications
Dual Layer Chassis : Yes
Output Meters : Yes
Tube or Solid State : Solid State
Power Requirement : 120V 50/60Hz, 4.8A
Standby Power Requirement : <0.25 Watts
Output Autoformer : Yes
Weights & Dimensions
Dimensions (W x H x D) : 44.5cm x 19.4 x 55.9
Weight : 34.1 kg
Informations supplémentaires
Tarif | 10 490,00 € |
---|